 |
 |
 |
 |
The B-2 PRO is a high-performance dual-diaphragm studio condenser microphone. Vocalists and recording studio owners will be amazed by its uncompromising audio performance and features such as the additional low cut filter. The B-2 PRO provides a slightly pronounced 12 kHz range, producing the kind of “presence” that often eliminates the need for high-frequency EQing that would raise the overall noise floor. The B-2 PRO provides that much-desired transparency that can only be found on high-end large-diaphragm condenser mics. Key features include selectable cardioid, omnidirectional or figure-eight directivity pattern. The low-cut filter removes distracting low-frequency sounds, and built-in shielding minimizes high-frequency interference. A 10 dB attenuator can be used with high volume signal sources. The microphone is delivered in a rugged hard case with a suspension mount and a windscreen.
Warranty Exchange Program
CheapBandGear.com and Pro Audio Video, Inc. does not handle your warranty claim. Do not ship you item back to us. Please follow the directions below for defective products or warranty repair.
Behringer’s new one-for-one Exchange Program is limited to participating dealers only. To initiate a warranty claim under the program, simply follows these easy steps:
1. Take your malfunctioning unit to a BEHRINGER Retailer (please call ahead to verify that your dealer is participating in the Program). 2. To show that the unit is covered under the warranty, remember to bring your original purchase receipt. 3. Once the BEHRINGER warranty is validated, you are entitled to a replacement unit. If it is inconvenient to organize warranty service through a retailer, you may also contact Behringer's staff. In this case, please use Behringer's Online Support or give Behringer a call and ask for warranty service. Please provide the following data:
1. Product name 2. Serial number & data code 3. Date of purchase 4. Retailer name 5. Detailed description of the problem Behringer Phone 425-672-0816, M-F, 7:30am to 5:30pm, Pacific Time
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Features
- 1" dual-diaphragm condenser microphone
- Pressure-gradient transducer with shockmounted, gold-sputtered, dual-diaphragm capsule
- Exceptionally flat frequency response (20Hz-20kHz)
- Selectable cardioid, omnidirectional, or figure-8 pickup pattern
- Signal-to-noise ratio: up to 77dB (cardioid), 76dB (omnidirectional), and 78dB (figure-8)
- Low-frequency roll-off switch
- Input attenuation of -10dB
- Ultralow-noise transformerless FET input circuitry
- Impedance: nominal - <100 ohm, >1 kohm
- Gold-plated 3-pin XLR output connector
- Rugged construction with satin nickel-plated brass body
- Heavy-duty suspension mount, windscreen, and transport case included
- 2-1/4" - head, 2" - shaft, 8-1/4" - length
- .55kg
|
|
 |
 |
 |
 |
|
 |

| Accessories for this product... |
|
|
|

|