The EUROPOWER PMP1000 powered audio mixer delivers 500 Watts of massive power and incredible performance through new-generation amplifier technology, crystal-clear sound, plus an ultra-compact and lightweight design. Other key features are the 24-bit stereo FX processor, IMP (Invisible Mic Preamp) mic preamps, Voice Canceller that's handy for karaoke applications. Get massive power and great sound in a lightweight power mixer package! Please note that this mixer requires speaker cables with Speakon connectors.

• DSP
• Converter: 24-Bit Delta-Sigma, 64/128-times oversampling
• Dynamics D/A: 90 dB
• Sampling rate: 46.875 kHz Delay Time
• Delay time: max. 5 s
• Signal run time (Line In … Line Out): approx. 1.5 ms
• Display type: dual 7-segment LED
• Amplifier output power:
• RMS @ 1 % THD (sine wave), both channels driven:
• 8 Ohms per channel: 90 watts
• 4 Ohms per channel: 130 watts
• RMS @ 1 % THD (sine wave), bridged mode:
• 8 Ohms: 200 Watts
• Peak Power, both channels driven:
• 8 Ohms per channel: 135 watts
• 4 Ohms per channel: 250 watts
• Peak Power, bridged mode:
• 8 Ohms: 500 watts
• Power Supply (EU/A)
• Mains voltage 100 - 240 V~, 50 / 60 Hz
• Power consumption 500 W
• Fuse: T 5 A H 250 V
• Mains connector: Standard IEC receptacle
• Power Supply (UL)
• Mains voltage: 100 - 240 V~, 50 / 60 Hz
• Power consumption: 500 W
• Fuse: T 5 A H 250 V
• Mains connector: Standard IEC receptacle
• Power Supply (J)
• Mains voltage: 100 - 240 V~, 50 / 60 Hz
• Power consumption: 500 W
• Fuse T 5 A H 250 V
• Mains connector: Standard IEC receptacle
• Power Supply (CN)
• Mains voltage: 100 - 240 V~, 50 / 60 Hz
• Power consumption: 500 W
• Fuse: T 5 A H 250 V
• Mains connector: Standard IEC receptacle
• Dimensions (H x W x D): 4 7/8" x 15 3/8" x 16 3/4" (122 x 390 x 425 mm)
• Weight: 15.435 lb. (8 kg)

Warranty Exchange Program

CheapBandGear.com and Pro Audio Video, Inc. does not handle your warranty claim. Do not ship you item back to us. Please follow the directions below for defective products or warranty repair.

Behringer’s new one-for-one Exchange Program is limited to participating dealers only. To initiate a warranty claim under the program, simply follows these easy steps:

1. Take your malfunctioning unit to a BEHRINGER Retailer (please call ahead to verify that your dealer is participating in the Program).
2. To show that the unit is covered under the warranty, remember to bring your original purchase receipt.
3. Once the BEHRINGER warranty is validated, you are entitled to a replacement unit.  

If it is inconvenient to organize warranty service through a retailer, you may also contact Behringer's staff.
In this case, please use Behringer's Online Support or give Behringer a call and ask for warranty service. Please provide the following data:  

1. Product name
2. Serial number & data code
3. Date of purchase
4. Retailer name
5. Detailed description of the problem

Behringer Phone 425-672-0816, M-F, 7:30am to 5:30pm, Pacific Time