The Europower PMP1280S mixer delivers 1,200W of massive power and incredible performance through new-generation amplifier technology, crystal-clear sound plus an ultra-compact and lightweight design. 24-bit stereo FX processors, IMP (invisible mic preamp) mic preamps, Voice Canceller and more round off this impressive audio mixer. Please note that this mixer requires speaker cables with Speakon connectors.

• Loudspeaker Outputs
• Type: Neutrik Speakon-compatible connector
• Load impedance; monitor/main mono: 4 - 8 Ohm; main mono/main mono: 4 - 8 Ohm
• Bridged: 8 - 16 ohm
• DSP
• Converter: 24-bit Delta-Sigma, 64/128-times oversampling
• Dynamics D/A: 90 dB
• Sampling rate: 40 kHz:
• Delay Time: max. 5 secs
• Signal run time (Line In > Line Out): approx. 1.5 ms
• Display type: Type 2-digit, 7-segment LED
• Output Power
• RMS @ 1% THD (sine wave), both channels driven; 8 Ohm per channel: 215 watts; 4 Ohm per channel: 480
• RMS @ 1% THD (sine wave), bridged mode: 8 Ohm: 900 watts
• Peak Power, both channels driven; 8 Ohm per channel: 300 watts; 4 Ohm per channel: 600 watts
• Peak Power, bridged mode: 8 Ohm: 1200 watts
• Power Supply: Mains voltage 120 V~, 60 Hz, Fuse 250 V
• Power consumption: 1000 W
• Mains connector: IEC standard receptacle
• Dimensions (H x W x D): approx. 12 2/5" x 18 1/10" x 8 3/5" (approx. 315 mm x 460 mm x 220 mm)
• Weight: 18-3/4 lbs. (8.5 kg)

Warranty Exchange Program

CheapBandGear.com and Pro Audio Video, Inc. does not handle your warranty claim. Do not ship you item back to us. Please follow the directions below for defective products or warranty repair.

Behringer’s new one-for-one Exchange Program is limited to participating dealers only. To initiate a warranty claim under the program, simply follows these easy steps:

1. Take your malfunctioning unit to a BEHRINGER Retailer (please call ahead to verify that your dealer is participating in the Program).
2. To show that the unit is covered under the warranty, remember to bring your original purchase receipt.
3. Once the BEHRINGER warranty is validated, you are entitled to a replacement unit.  

If it is inconvenient to organize warranty service through a retailer, you may also contact Behringer's staff.
In this case, please use Behringer's Online Support or give Behringer a call and ask for warranty service. Please provide the following data:  

1. Product name
2. Serial number & data code
3. Date of purchase
4. Retailer name
5. Detailed description of the problem

Behringer Phone 425-672-0816, M-F, 7:30am to 5:30pm, Pacific Time