These professional condenser microphones for studio recording and live applications have all the big-time features packed in an extremely compact form factor. They are sold as a matched pair -- perfect for stereophonic recording -- for a price you wouldn't even consider it bought you a single one. The C-2s utilize a low-mass diaphragm for ultra-wide frequency response and ultimate sound reproduction and their inconspicuous size makes them perfect for acoustic instruments, overhead applications, pianos and similar. The cardioid pickup pattern effectively eliminates feedback, plus there is switchable low frequency roll-off and -10 dB input attenuation. Ultra low-noise transformerless FET input eliminates low-frequency distortion, while a gold-plated 3-pin XLR connector assures the highest signal integrity. Custom microphone stand adapters, windscreens, stereo-bar and transport case are all included, making these condenser microphones ready for action straight out of the box! If super-compact size is paramount but you don't want to compromise on the performance, then a pair of C-2s is the answer.

• Transducer Type: True condenser, 16mm (0.63 in.) single diaphragm
• Operating Principle: Pressure gradient
• Polar Pattern: Cardioid
• Connection: Gold-plated balanced XLR connector
• Open Circuit Sensitivity (at 1kHz): -41dBV (0dBV = 1V/Pa)
• Frequency Response: 20Hz - 20kHz
• Level Attenuation: -10dB (switchable)
• Low-Cut Filter: 6dB/oct. At 120Hz (switchable)
• Max. SPL (1%THD @ 1kHz): 140dB (0dB); 150dB (-10dB)
• Equivalent SPL (IEC 651): 19dB-A
• Signal-to-Noise Ratio: 75dB
• Nominal Impedance: 75 ohms
• Load Impedance: >1k ohms
• Supply Voltage: +48V
• Supply Current: 3mA
• Dimensions:
• Shaft: Approx. 13/16 in. (20mm)
• Length: Approx. 3-11/16 in. (94mm)
• Weight: Approx. 0.21 lbs. (900g)

Warranty Exchange Program

CheapBandGear.com and Pro Audio Video, Inc. does not handle your warranty claim. Do not ship you item back to us. Please follow the directions below for defective products or warranty repair.

Behringer’s new one-for-one Exchange Program is limited to participating dealers only. To initiate a warranty claim under the program, simply follows these easy steps:

1. Take your malfunctioning unit to a BEHRINGER Retailer (please call ahead to verify that your dealer is participating in the Program).
2. To show that the unit is covered under the warranty, remember to bring your original purchase receipt.
3. Once the BEHRINGER warranty is validated, you are entitled to a replacement unit.  

If it is inconvenient to organize warranty service through a retailer, you may also contact Behringer's staff.
In this case, please use Behringer's Online Support or give Behringer a call and ask for warranty service. Please provide the following data:  

1. Product name
2. Serial number & data code
3. Date of purchase
4. Retailer name
5. Detailed description of the problem

Behringer Phone 425-672-0816, M-F, 7:30am to 5:30pm, Pacific Time